5月 312014
 

This is my own (unofficial) report of FUDCon APAC 2014 Day 0 (Friday).

Preparation

There were no speech sessions for FUDCon on Friday, so it was all about event preparation in the day. At around 11:00 AM, I called Justin Wong, another guy from TUNA, also a volunteer of host, to help me move event gifts in my lab downstairs, where Emily waited for us with her car. We went to the venue, New Main Building in Beihang University, on the car full with sponsored gifts, including but not limited to cafe cups, hats, DVDs, books. Dongfengweixiao also just arrived when we got there. We had a brief lunch together at PengLaoShi, a Chinese fast food restaurant.

On the way back to the venue after lunch, we ordered the bottled drinking water for the three days. In the afternoon we are busy with setting up everything. Zamir (zsun) arrived to help. First we set up the booth with the desks rent from venue as well as desks from Beihang leagues (credit Wang Yang). The shop owner of bottle water helped with moving the desks from outside to venue. We had a booth for Fedora too, which dongfengweixiao took care of, so we left some Fedora flyers (and later on many stickers, F20 Live DVDs) there. We met one guy in orange T-shirt while setting up the booth. He asked about the place for upcoming GNOME training sessions. The next day I knew it was Tobi, the host in main hall from GNOME side!

Tong Hui (tonghui) arrived later and then event roll-up posters, X posters, and vertical banners arrived. I helped to hang up the two vertical banners in the main hall with tonghui and dongfengweixiao. It took three up-and-downs to finally make them look good (symmetric and smooth). Next I helped to buy some utilities such as power strips, mark pens, glue, and “postit” sticky notes. I also fetched the express of stickers. After I came back, many sponsors were there. There were some disagreements with booth position, but they were solved later. Li Bin (libin) and many other volunteers also arrived, and the registration desks (sign-in office) was set up. They put various small gifts into conference bags. T-shirts arrived and classified. Large banner which sat on the ground arrived a bit late, but was put up quickly. Time went by without being noticed, and it was almost 7 o’clock when we headed for the FUDPub, i.e. the welcome party.

FUDPub (Welcome Party)

The FUDPub was at Sculpture in Time Cafe, a cafe bar on campus and quite near to the venue. It was scheduled to begin from 6:00 PM, and we had volunteers waiting there to help from that time. As mentioned above some volunteers and I arrived a little late, and there were few empty seats then. Some early birds already begin to drink beer when we started to order pizzas and noodles! Around 60 people from the event were there, and the cafe bar seemed to be not able to handle so many people. The service was slow and a bit chaotic, but luckily we had sunny (and later on libin) who took care of the detailed list of ordered and served food. Except the long waiting time for food, it was good. I met and said hello to Ankur, Nitesh and other guys. Max called on emily, libin and me to toast to everyone. Ankur asked to continue discussion at the hotel after the party, but I stayed till 10:00 PM at the cafe bar since tonghui had so many interesting stories to tell! While we went to the hotel, I picked up the Fedora 20 Live DVDs with GNOME Desktop, whose creation was finished late due to some issues with DVD sleeves during production.

Hotel

The conference hotel is Beihang Training Center, which is inside Beihang and near to the conference venue. There was no WiFi at hotel, only one wired interface available. Luckily tonghui set up a WiFi AP using his laptop with GNOME 3.12. He also charged his camera for next days’ activities. I replied some emails, took a shower, and then went to bed. I had planned to revise my slides, but it had to be delayed to Saturday.

4月 202014
 

Fedora Activity Day (FAD) China 2014 was successfully held at Park Plaza of Beijing Science Park, Beijing on Mar 30 (Sunday). It was organized by Fedora Zhongwen User Group with the help of CSDN. It was under the umbrella of Open Source Technology Conference (OSTC) 2014 initiated by CSDN, being one of three parallel sessions in the afternoon. There were around 600 attendees in total, and about 200 in the FAD session.

I arrived at the venue in the morning with more than 100 Live DVDs and 500 stickers. We distributed them during the Red Hat booth as well as the afternoon session. In the morning there were several keynote speeches and one panel discussion. More details can be found in the CSDN news report.

The afternoon session began at 1:30 pm. Thomas Yao and I served as the hosts of FAD. The first talk was “About Those Python Asynchronous Concurrency Frameworks” by Fantix King, CTO at FlowForge Games, Archlinux x32 committer, and Python programmer. He introduced the concept of concurrency, compared Tornado, Twisted, and Gevent, and then introduced asyncio, the newly available framework in Python 3.4.0.

Python Concurrency Frameworks by Fantix King

Python Concurrency Frameworks by Fantix King

The second talk was “Use Linux Command Line as a Hacker” by Xiaodong Xu (Toy), the webmaster of LinuxToy. He shared a lot of command line tips to fix typos, manipulate shell history, and speed up operations. In the QA session he talked about his opinion on text editor choice and Linux distro choice.

Toy

Toy

The next talk was “Reform the Toolbox: From Open Source Software to Open Source Service” by Daobing Li, the chief architect of Qiniu, who is also a Debian developer. He talked about the achievements of open source cloud service, and shared his vision of future cloud service – cloud in computer room. He also gave suggestions on how developers treat cloud services.

Daobing Li

Daobing Li

Following the talk was “Introduction to HackRF & GNURadio” by Scateu Wang, the creator of hackrf.net and the former leader of TUNA. He demonstrated the ease of using GNU Radio to develop software defined radio applications for DTMF decoding, FM modulation and demodulation, digital audio broadcasting, etc. He also introduced HackRF, the newly created inexpensive hardware peripheral used with GNU Radio.

Scateu Wang

Scateu Wang

The next talk was “Fedora Ambassadors & FUDCon” by myself. I introduced the four foundations of Fedora Project, gave an overview of Fedora Ambassadors project, showed what ambassadors do and how reimbursement works, and then shared the recent progress of organizing FUDCon APAC 2014 to be held in May and welcomed everyone to join.

Alick

Alick

Next Emily Chen, GNOME.Asia founder, senior software engineer in Oracle, gave the talk “Bringing More Women to Free and Open Source Software”. She introduced the Outreach Program for Women initiated by GNOME, talked about how it increases the women participation in open source projects. The annual program provides prize for women participants in similar way with GSoC, but it does not require the applicants to be students, and applicants does not need to write code in the program.

Emily Chen

Emily Chen

The following talk was “Operation and Management of SHLUG” by Thomas Yao, leader of Shanghai Linux User Group (SHLUG), founder of GitCafe.com. Thomas gave an impressive speech without any slides. He talked about the history of SHLUG and shared the experience. He pointed out the pioneering effort of building the first open source mirror site in China, Geekbone, and the importance of keeping the community focus on technique rather than commercial activities. He also shared the interesting stories of Hacking Thursday and Rails Girls.

Thomas Yao

Thomas Yao

After that is the panel discussion on “History and Future of Open Source OS in China”. It was moderated by Thomas Yao, and the panelists are Weijia He from Redflag College of Education, Jianzhong Huang from Redflag R&D, Jack Yu from UbuntuKylin, and Yong Wang from Linux Deepin. They shared their opinions and experiences about Linux Desktop, collaboration of distros, cultivation of open source talents, and open source in education.

Panel Discussion

Panel Discussion

At last, Martin, leader of Beijing Linux User Group (BLUG) gave a lightining speech of introducing BLUG and its activities. Everyone is welcomed and should not worry about their English since there are actually many Chinese there. And it is quite easy to join the event by registering on BLUG website or joining discussion in mailing list.

At night there is the Open Source Night, a social event for free face-to-face discussions. Unfortunately I didn’t attend it. I had dinner with FUDCon and GNOME.Asia organizers and discussed current progress and following tasks.

Overall it is a very good event in my mind. If I have to point out some issues, I’d say there might be too many talks and no time for tea or coffee in between! Besides, my own talk was prepared in a bit hurry, and not practised well beforehand.

The slides links is available on CSDN news. They also provide a Chinese report for FAD. There is a great minute for the meeting by Bojie Li from USTC LUG. The videos and various other materials can be found at this link.

1月 032014
 

NOTE: For Chinese readers, there is a Chinese version of the report here.

Happy new year everyone!

The Fedora 20 Release Party in Beijing was successfully held at Turing Office last Wednesday (Dec 25). It was organized by Fedora Zhongwen User Group with the help of Beijing GNOME User Group. There were 22 registrants on site, which is comparatively fewer than previous due to the time arrangement.

The release party began at 6 pm. (I was late for about 10 minutes.) We conducted the registration on a computer: We opened a LibreOffice Calc spreadsheet filled with pre-registrants’ information so that they can just type 1 to register. As for others we required them to type their names and email addresses. As usual, every attendee can pick a Live DVD and a sticker. We prepared 50 Fedora 20 DVDs. Each of them has a label with Fedora 10th anniversary icon, and is 64bit with either GNOME or KDE. The stickers are from Fedora, GitCafe, and CSDN CODE.

The party entered pizza time at around 6:30 pm. We had ordered seven pizzas, 5 large and 2 small. Along with drinks and snacks sponsored by CSDN, they more or less met the requirement of everyone’s supper. While supper we managed to collect four topics for the talk.

The talk session started from 7:30 pm. In the opening address, I welcomed everyone, and introduced the features (changes) of Fedora 20 and the 10 year history of Fedora project briefly. Then it came to the first talk, which was "systemd Introduction" by Robin Lee, an active Fedora packager, FZUG member, and skilled programmer. He talked about the origin, main concepts, and core implementation of systemd as well as its impact on application development. There were in depth discussions about the implementation details and comparison with other competitors in and after the talk.

systemd Introduction by Robin Lee

systemd Introduction by Robin Lee

Then there were three short talks. The first one was "Open Source Strategies of CSDN" by Orson Zhai. He pointed out that CSDN has set open source as one focus, and CSDN CODE is striving to provide a better collaboration platform for open source projects in China. Then David Liang from SUSE talked about the state and progress of "Automatic Testing for GUI". Currently there is no mature tool for automatic GUI testing to increase the efficiency of desktop testing. Projects such as openQA aim at building such tools and are being developed. The last talk was an introduction to Fedora.next by Robin Lee. Fedora.next is a plan being carried to improve the current release practice of Fedora. Based on the reflections of the existing practice, Fedora.next tries to replace the single repository with four rings of packages. Each ring can has its packaging polices. Besides, multiple working groups with possibly different release strategies are formed to build multiple products. In summary Fedora.next aims at better integration of Fedora and the overall open source ecosystem, and more involvement and contribution from more people.

We prepared several GitCafe cups, and Turing generously provided some Linux books. They were distributed as gifts for questioners. CSDN brought gifts for speakers too. Then after all the talks, at around 9:30 pm, we took a group photo.

Group Photo

Group Photo

It is worth pointing out several issues for the event. The pizzas was sent earlier than the registration, without receipts. The number of attendees is small since it was arranged at weekday night. The discussions were more abroad than expected and led to overtime. So to avoid the issues:

  • When ordering takeout, specify both the earliest and latest time.
  • To attract more people, make the event happen on weekend day (afternoon) at easily findable venue.
  • Prepare for overtime, and put the start time as early as possible.

The slides links is available on the wiki page. The photos can be found on G+. Don’t forget to take the post-event survey before Jan 11! You feedback is appreciated!

1月 022014
 

先给各位朋友道声新年快乐!

上周三(12 月 25 日)晚上在立水桥南附近的图灵办公室,由 Fedora 中文用户组主办,北京 GNOME 用户组协办,并由 CSDN 赞助的 Fedora 20 发行派对北京站活动顺利举行。由于时间是在工作日,恰逢圣诞,又是晚间活动,到场人数与以往相比偏少,最终注册了 22 人。

活动开始时间是下午六点,我迟到了十多分钟。这次注册为电子注册:在 Fedora 电脑上开一个 LibreOffice 电子表格,预报名过的人可以直接填 1 进行签到,现场报名的只需填上自己的名字和邮箱。照惯例,注册后每人可以领取一张 Live 光盘和一枚贴纸。我们准备了 50 张 Fedora 20 光盘,盘贴上有 Fedora 10 周年纪念字样,光盘有 GNOME 64 位以及 KDE 64 位两种以供选择。这次的贴纸不仅有 Fedora 的金属图标,还有 GitCafe 贴纸和 CSDN CODE 带来的 Git 主题贴纸。

大约六点半时,活动进入比萨时间。我们预订了五大两小共七个外卖比萨,加上 CSDN 赞助的零食饮品等,比较好地满足了大家的晚餐需求。在晚餐闲聊环节,我们征集到了一大三小共四个主题演讲。

演讲从七点半开始。在各个主题演讲之前,我对大家的到来表示欢迎,并简单介绍了 Fedora 20 新特性以及 Fedora 项目 10 周年的历史。之后便开始了第一个主题演讲。演讲是活跃的社区成员、Fedora 打包者李瑞彬带来的“systemd 简介”。他介绍了 systemd 的历史缘起、主要思想、实现核心,以及对程序开发的影响。大家在演讲中和演讲后对 systemd 的实现细节、与竞争者的对比等方面进行了深入的讨论。

李瑞彬介绍 systemd

李瑞彬介绍 systemd

之后是三个较短的演讲。首先是 CSDN CODE 的翟京介绍了 CSDN 的开源策略。开源已成为 CSDN 的一个重心,其推出的 CODE 平台将力图为国内开源项目提供更好的协作平台。然后是 SUSE 的 David Liang 介绍了图形界面自动化测试的现状和发展。图形界面程序的自动化测试可以极大提高图形界面测试工作的效率,但目前尚无成熟工具,OpenQA 等项目在力图打造优秀的图形界面自动化测试工具。最后一个演讲是李瑞彬对 Fedora.next 的简要介绍。Fedora.next 是 Fedora 现有发行模式的改进计划。它基于对现有模式的反思,将单一的软件仓库分为四个环 (Ring),不同环可以采取不同的打包策略,另外组建多个工作组 (Working Group),打造多个产品,不同组可以有不同的发布策略。总体上力图让 Fedora 和开源生态更好地融合,让更多人可以参与到 Fedora 项目当中。

我们事先准备了若干杯子,图灵提供了若干 Linux 图书,在问答互动环节作为奖励进行了分发。最后九点三十许,大家合影留念。

集体合影

集体合影

这次活动也呈现出一些问题与不足:比萨送餐人员比预定时间提前半个小时把比萨送到了,先于不少参加活动人员的到场时间,而且没有现场给发票。因为是工作日晚上,加上场地位置在五环外对于其他区的人来说相对偏远,最终现场参与的人数偏少。虽然人不多,但大家讨论交流的比较深入广泛,时间控制得不太好,最终活动结束比预定晚了半个小时。总结出来的经验教训是:

  • 外卖订餐不仅需要指定不晚于的时间,还要指定不早于的时间。记得要发票。
  • 要想让活动参与人多,最好在周末白天(下午),场地交通要方便且易找到。
  • 要有超时的准备,开始时间应尽量往前赶。

本次活动演讲的幻灯片链接可以在维基页面看到。活动照片可以在 G+ 上看到。最后,参加了活动的朋友请记得在 1 月 11 日之前填下反馈调查问卷!欢迎您对活动留下宝贵意见!

修订记录:

  1. [2014-01-02] 修正星期几错误……
12月 052013
 

JavaScript 社区的国际性技术大会 JingJS 2013 于 11 月 9 号和 10 号两天在学校东门外的紫光国际会议中心(紫光二楼)举行,我有幸作为活动志愿者一枚近距离围观了两天的活动。这里记录下其中的点滴收获。

活动有众多演讲,特别是有许多国外讲师,组织工作会很辛苦。不过得知活动的组织核心只是几个技术大牛在负责。佩服他们的热情和能力。也耳濡目染到一些组织经验,包括日程调整、活跃气氛等。

活动第一天上午,Jason Denizac 在题为 My Year With Node.js (我与 Node.js 的一年) 的分享中,说自己是个 writer (作家),也 write code (写代码)。听起来感觉碉堡了,这个认识水平比一般人高了不少。

IMG_0007

后面 cnblog 的创始人 Issac Mao 在不用幻灯片的分享中,谈他对社区、分享等的体会。他提到 sharism 这个词,将分享精神上升为一种主义。他还提到 meme 一词,他建议翻译为“媒母”(音)。谈到多种文化时常提到这个词,维基百科上给出的翻译是“迷因”“模因”等。不确定它们是否恰切地反应了词的含义。此外他还提到他们做的对社交媒体信息的归档。

IMG_0010

中午之前有个 workshop 教学环节。无奈家用路由器根本无法满足会场二百多人同时连接的需求,最后只能选取若干幸运者代表大家参与一下。

午饭和众多大神一起在科技园里某餐馆吃的,其中包括 Domonic Tarr,npm 模块数目排行第三的大神。等餐期间,他学习了中文中的模块、土等词汇,并用在了自己第二天的演讲稿中。

头天最吸引人的演讲恐怕是 James Halliday 带来的 the wizard of moduletopia (模块之魔法)。James 不经意间展示了飞速的键盘操作,亲手绘制的漫画风格幻灯片,以及用 Vim 放映展示代码功能的“幻灯片”。James 网名 substack,目前提交 npm 模块数量上排行第二,其中 browserify 模块已经颇为知名。

IMG_0018 IMG_0019 IMG_0021

第二天的演讲,Eric Redmond 在题为 HTTP Is Hard 的演讲中讲述了 HTTP 状态码背后的含义,以及常见的误区。人们或许会习惯于检查 HTTP 回应状态吗是否是 200 以确定是否是正常回复,然而事实上 2xx 都意味着正确结果。有个网站可以帮忙查询每个状态码的含义,用法如下:

curl -I http://codes.io/206

(此外 418 也是一个有趣的状态码。)除了状态码之外,HTTP 本身就支持授权认证 (Basic authentication)。值得一提的是,Eric 还是 7 Databases in 7 Weeks 一书的作者。

百度的 Yao Tong 介绍了他们的一个针对实时性应用的开源纯 JavaScript 框架 Clouda。现场测试的待办事项列表应用在使用手机 GPRS 网络时依然表现良好,令人印象深刻。

闪电演讲环节,一个小朋友流畅地用英文介绍了自己的小项目 gifme。它是一个 Web 应用,获取访问用户摄像头权限后,可以截取一段动作,并自动生成 GIF 图片,然后可以选择保存在本地或者分享到社交网络。

之后有演讲总结了自动化 CSS 测试,介绍了语法检查、lint、截图对比等方式,推荐了 hardy 模块。演讲者 Jakob Mattson 强烈建议设计先行的做法。

来自阿里的漂亮的 Zhouxuan Yang (fool2fish) 介绍了名为 totoro 的前端测试工具。没错,这个名字来自宫崎骏的龙猫。这一工具的设计特点是简单易用足够稳定。

最后一个演讲是沈嵘带来的 Grunt.js 介绍。Grunt 是一个自动化构建工具,实现了用 JavaScript 构建 JavaScript 的美好特性,这在别的语言是似乎还是没有过的,这一特性带来了极大的便捷。Grunt 的安装需要两步,先全局安装 grunt-cli,再给每个项目安装 grunt。详细内容见幻灯片材料

晚上的 After Party 在五道口的 Pyro Pizza,那里提供了丰盛的食物饮料,还有游戏环节,不过最主要的活动还是随机的小范围的聊天。自己也应该更积极地投入到这种氛围中去。

9月 272013
 

Note: For the Chinese version of this report, please refer to this page.

On last Saturday (Sep 21), the Software Freedom Day Activity at Tsinghua University was held. It was hosted by Tsinghua University Network Administrators (TUNA) with the assistance of Beijing GNOME User Group (BJGUG). There were more than 60 attendees. The onsite registration began at about 2 pm, and it was done on a laptop computer running LibreOffice Calc. The spreadsheet would be used by the lucky draw in the end. We prepared CDs, stickers, and posters, which were readily available for every registrants.

The formal event started at about 2:30 pm with the welcome speech by me (alick). I introduced what software freedom day (SFD) is and what free software is. I also introduced the event host and sponsors. This event was sponsored by Mozilla, COPU, GitCafe, CodeWeavers, Linux Deepin, and Fedora community. They provided many kinds of swag as gifts. Besides Mozilla also covered the cost of SFD posters and so on. I also introduced the NITE-LPI certificate program supported by COPU.

Alick introduces free software

Alick introduces free software

Following was three speeches. The first one was “GNOME Shell” by Li Bin, the current BJGUG leader. He talked about components of GNOME Shell and its flexible and powerful extension capability, and then demonstrated the development of GNOME Shell extensions. gnome-tweak-tool and https://extensions.gnome.org/ was introduced during the talk. The main programming language used to develop a GNOME Shell extension is Javascript. With the help of gnome-shell-extension-tool, an extension can be created rapidly.

GNOME Shell by Li Bin

GNOME Shell by Li Bin

Next was the talk “Firefox & Firefox OS” by Yuan Xulei, who is an engineer from Mozilla. He introduced the features of Firefox, and explained in details how to use addon to customize Firefox and improve the web browsing experience. Later on he talked about Firefox OS, a new open source mobile operating system by Mozilla based on Linux and Gecko technologies.

Firefox OS by Yuan Xulei

Firefox OS by Yuan Xulei

After a short break, Zhou Jianfeng, a teacher from Center for Astrophysics, Tsinghua University, gave the speech titled “Airelinux”. He first introduced Astrophysical Integrated Research Environment (AIRE), and then talked about the goal and plan of Airelinux project. Airelinux is a new Linux distribution targeted to high performance computing in astrophysics. Please join it if you are an enthusiastic astronomer, or active in the community of free software (esp. Debian), or an artist who can help with the artwork design!

Airelinux by Zhou Jianfeng

Airelinux by Zhou Jianfeng

There was five minutes QA for each talk. Gifts such as Firefox toys, notebooks, cups, and mouse pads were distributed.

After the speeches was the parallel demo, Hackfest and Installfest session. Small groups were formed and there were face to face talks. There were two demonstrations. One is brought by Fedora community, where Gerard, a Fedora ambassador, talked with people and encouraged them to join Fedora project. Three Fedora T-shirts were distributed. Another demo was for LPI certificate program, where Wang Yun, the country manager of LPI, explained it to interested people. The hackfest was an software defined radio experiment conducted by Wang Kang (scateu), where data was transmitted between the audio interface, and gMFSK was used to modulate/demodulate on the PC. It was quite attractive to the audience.

At about five o’clock, we had the lucky draw. It was a cute web interface, implemented in Python by Justin Wong (bigeagle). In the lucky draw 3 T-shirts and 5 CrossOver license codes were distributed. At last we had group photos.

Group photo

Group photo

The links to the slides and videos of speeches are available on the SFD Wiki page. The photos can be found at G+ pages. And as a final note, we encourage every attendees to leave your feedback when you got the email notice for the post event survey!

9月 252013
 

上周六(9 月 21 日)北京天气晴好,由清华大学学生网管会 (TUNA) 主办,并由北京 GNOME 用户组 (BJGUG) 协办的自由软件日清华站活动顺利举行。活动有超过 60 人参加。接近下午两点时开始现场注册,这次活动的注册为电子注册,每个人在注册电脑上的 LibreOffice 表格中填写各自的信息,这个表格会被最后幸运抽奖的程序直接读取。我们准备了光盘、贴纸与宣传海报,注册后每人都可以领取。

活动正式开始于大约两点半。开场时由我(赵涛)致欢迎辞。我在欢迎辞中介绍了什么是自由软件日活动、什么是自由软件,此外介绍了活动的主办方和赞助单位。本次活动得到了谋智网络 (Mozilla)、中国开源软件推进联盟 (COPU)、GitCafe、CodeWeavers、深度 Linux、Fedora 社区等的大力支持,他们为本次活动提供了丰富多样的礼品,其中 Mozilla 还对活动宣传品等的开销提供支持。我还对 COPU 支持的 NITE-LPI 联合认证项目做了介绍。

赵涛介绍自由软件

赵涛介绍自由软件

之后便开始了主题演讲环节。第一个演讲由 BJGUG 主席李彬带来,题为“GNOME Shell”。李彬在演讲中介绍了 GNOME Shell 的组成,灵活强大的扩展 (extension) 机制,还现场演示了扩展开发。演讲中推荐了 gnome-tweak-tool 和 https://extensions.gnome.org/ 网站。GNOME Shell 扩展开发主要使用 Javascript,借助于已有的扩展框架生成工具 gnome-shell-extension-tool,扩展可以很快捷地被开发出来。

李彬介绍 GNOME Shell

李彬介绍 GNOME Shell

紧接着是来自 Mozilla 的工程师袁徐磊带来的“Firefox & Firefox OS”。他介绍了流行的开源浏览器火狐 (Firefox) 的特性。使用附加组件 (addon) 定制 Firefox,改善网页浏览体验是 Firefox 的一大特点,袁徐磊对此做了详细讲解。他还对 Mozilla 新推出的基于 Linux 和 Gecko 技术的开源移动操作系统 Firefox OS 的发展和开发平台做了介绍。

袁徐磊介绍 Firefox OS

袁徐磊介绍 Firefox OS

短暂的中场休息后,来自清华大学天体物理中心的周建锋老师做了题为“Airelinux”的演讲。他首先介绍了天体物理集成研究环境 (Astrophysical Integrated Research Environment) 即 AIRE,继而介绍了 Airelinux 项目的目标和计划。Airelinux 是一个新的面向天文学计算的 Linux 发行版项目,欢迎广大天文爱好者、自由软件社区贡献者(特别是 Debian 贡献者)、以及设计人员的加入。

周建锋介绍 Airelinux

周建锋介绍 Airelinux

每个演讲最后都留有大约五分钟时间进行问答,问答互动环节的奖励有火狐玩偶、笔记本、塑料杯、鼠标垫等。

主题演讲环节之后,是并行的展台展示、Hackfest、Installfest 环节,这个环节大家分成若干小组,进行面对面的交流。展台有两个,其一是 Fedora 社区的展示,Fedora 大使吉拉德 (gbraad) 在现场和大家做了深入交流,鼓励大家加入 Fedora 项目,并送出了 3 件 Fedora T 恤。另外一个展台是对 LPI 认证项目的介绍,LPI 中国区经理王雲老师为大家做了答疑解惑,她表示今后会在高校做更多的活动介绍 LPI 项目。Hackfest 则是有王康带来的软件无线电实验。这个实验用声卡进行信息传输,在电脑上用 gMFSK 做调制解调,使现场同学领略到了软件无线电的魅力。

五点左右时,活动来到了最后的幸运抽奖环节,抽奖程序是一个卖萌的网页界面,主体逻辑由 Python 语言实现,作者是 Justin Wong (bigeagle)。我们抽奖送出了 3 件 T 恤衫和 5 个 CrossOver 正版序列号,其中序列号在活动后邮件送出。活动最后大家合影留念。

欢乐的集体照

欢乐的集体照

整个活动过程中也遇到了一些问题。一是筹备期间教室借下来的时间较晚,海报宣传时间不足一周,又恰逢中秋放假,使得线下宣传力度不够。微博大屏幕、人人活动墙的想法没有及时提出,未能实现。二是在开场前注册所用电脑到的较晚,加上电子注册、输入法的问题等,使得注册缓慢,活动比预计推迟了约半个小时正式开始。第三是礼品发放有些混乱,部分礼品被热情的在场同学一抢而空,大概是因为没有明确说明中场休息时只有提问的同学可以上台领取礼品。给今后活动的启示是:早借教室早宣传,注册工作要做好准备尽早到位,礼品发放必须说明规则避免混乱。

活动演讲的讲稿链接、演讲视频的优酷链接可以在维基页面上找到。活动照片请看 G+ 页面。最后,感谢所有到场人员的热情参与,请参加活动的朋友收到活动调查问卷的邮件通知后留下您的宝贵意见。

8月 222013
 

NOTE: For Chinese version, please refer to this post.

Last Saturday (Aug 17), the Fedora 19 Release Party in Beijing, China was successfully held by the joint organization of Fedora Chinese User Group (FZUG) and ChinaUnix community (CU), with the help of Beijing GNOME User Group (BJGUG). The weather was nice that day, and more than 40 people attended the activity.

The release party was scheduled to begin at 14:30 (UTC+8, local time). A few early birds came just after 13:00. Once the attendees registered, they can pick a Live CD among GNOME 32bit, GNOME 32bit, and KDE 64bit ones. The total number of prepared CDs is 50.

After the short welcome by Alick Zhao from FZUG and Rongmao Zhou from CU, the release party entered the first talk. It was “Openshift and Cloud” by Gerard Braad, who is a long term active Fedora ambassador, regional mentor for APAC, member of FZUG. He explained different projects (OpenStack and Openshift), different levels of virtualization (full virtualization, para-virtualization, and OS-level virtualization), and XaaS (IaaS, PaaS, and SaaS).

Openshift and Cloud by Gerard

Openshift and Cloud by Gerard

Following was the talk “SystemTap Introduction” by Robin Lee, who is an active Fedora packager and skilled programmer. The talk covered some basic and advanced stuff, and was interleaved with quite a lot of examples and demonstrations.

SystemTap Introduction by Robin Lee

SystemTap Introduction by Robin Lee

Then after a short break Tong Hui, an open source evangelist, gave the speech “3D Printing at Fedora 19”. He introduced history of 3D Printing, open source 3D printing, 3D printing at Fedora 19, and so on. He highlighted that Fedora 19 is the first OS, not just the first Linux distribution, to fully support 3D printing. He also gave some outlook for 3D printing in the future.

3D Printing by Tong Hui

3D Printing by Tong Hui

We had Q&A between speakers and the audience, and distributed several T-shirts and books as gifts. Then we shared the Fedora cake to celebrate Fedora 19 release. At last we took group photos.

Group photo

Group photo

The slides links of above talks will be available on the wiki page. The photos of the event can be found on G+. Don’t forget to take the post-event survey! We need your feedback!

8月 222013
 

上周六(8 月 17 日)北京天气晴好,由 Fedora 中文用户组与 ChinaUnix 社区联合举办,并由北京 GNOME 用户组协办的 Fedora 19 发行派对北京站活动成功举行。活动有超过 40 人参加。活动正式开始时间是下午两点半,一些听众刚过一点就早早地来到了会场。会场门口设有注册环节,注册后每人可以领取一张 Live 光盘和一枚贴纸。光盘准备了 50 张,有 GNOME 32 位、GNOME 64 位以及 KDE 64 位可供选择。

开场时有 Fedora 中文用户组的赵涛和 ChinaUnix 的周荣茂分别致辞。之后便开始了第一个主题演讲。演讲由吉拉德带来,题为“Openshift 与云”。吉拉德是 Fedora 中文社区的成员,是 Fedora 项目长期活跃的贡献者,Fedora 大使,并且是亚太地区的大使导师。他在演讲中介绍了诸如 OpenStack、Openshift 等开源项目的异同,不同层次的虚拟化技术(全虚拟化、半虚拟化以及操作系统级虚拟化),还有各种云计算服务模式(架构即服务、平台即服务、软件即服务)的内涵。

吉拉德介绍 Openshift 与云

吉拉德介绍 Openshift 与云

紧接着是活跃的 Fedora 打包人员、程序员李瑞彬带来的“SystemTap 简介”。他的演讲由浅入深,介绍了 SystemTap 这一系统跟踪工具的基本特点、简单应用、强大之处等,并给出了综合应用,讲解过程中穿插了许多示例与现场演示。

李瑞彬介绍 SystemTap

李瑞彬介绍 SystemTap

短暂的中间休息后,来自 DFRobot 的开源布道师佟辉做了题为“用 Fedora 19 玩转 3D 打印”的演讲。他介绍了 3D 打印的历史,开源的 3D 打印解决方案以及在 Fedora 19 中的支持情况。他着重指出了 Fedora 19 是第一款完全支持 3D 打印的操作系统。此外他还对 3D 打印的未来发展做了展望。

佟辉介绍 3D 打印

佟辉介绍 3D 打印

我们事先准备了若干 T 恤衫和 Linux 图书,在问答互动环节作为奖励进行了分发。之后我们分享了定做的 Fedora 蛋糕。最后大家合影留念。

集体合影

集体合影

活动演讲的讲稿链接会放在维基页面上。活动照片可以在 G+ 上看到。最后,参加了活动的朋友别忘了填下调查问卷!我们非常希望得到您的反馈!

8月 182013
 

上周六参加了 Perl China 2013 的活动,总体上收获颇丰。由于日程紧张,只听了上午的演讲。又由于分身乏术,只听了一个厅的主题。活动地点在高端大气的朝阳区万通中心,离朝外 SOHO、CCTV 大裤衩、国贸都不远。根据百度地图指的路线,从呼家楼地铁站 H 出口最为近便。不过从 10 号线下车找到 6 号线的 H 口就费了一些周折。之后从地铁口出来到会议地点不慎又走了冤枉路,深入到了这片城中村。最后发现正确的路线需要经过一个栅栏门,这在地图上是显示不出来的。终于到了会议地点,拿到了 T 恤衫。这次上面是 Perl 6 的吉祥物蝴蝶 Camelia,颇为可爱。只是赞助商的标志也很明显。之后的开场致辞,不得不提的是有漂亮的赞助商 HR 发言。

第一个演讲主题是扶凯带来的 Mojolicious Web 框架 (简称 Mojo)。根据介绍,Mojo 是一个全功能的 Web 框架,支持 IPv6、TLS 等,支持热部署。Mojo 在路由时可以用正则表达式约束匹配。Mojo 伸缩性也很好,可以做简单的单文件应用,也可以提供复杂应用的框架结构和模板。Mojo 的 HTML 模板可以用 EP,也可以用 XSlate 等。Mojo 还提供了 Web 客户端,支持 CSS 选择器,能容易地进行 DOM 操作。附讲稿链接

第二个演讲是 Robin Lee 的 Perl on Fedora 介绍。演讲介绍了 CPAN 包与 Fedora 仓库中的 RPM 包的映射关系,包括 CPAN distribution 到 RPM 的映射(加 perl- 前缀,双冒号换成减号 -)、Perl 模块到 RPM 的映射(命名为 perl(module name))。另外还介绍了用 cpanspec 打包 CPAN 包的步骤。附讲稿链接

上午最后一个演讲是 @ARGV 对 ElasticSearch (简称 ES)的介绍。通过演讲了解到了 ES 是一个基于 Lucene 的全文检索工具。其中还介绍了 logstash,一个支持众多输入源、众多输出源的日志收集分析暂存工具。还有 Kibana,一个疯狂重构的日志搜索 Web 前端。Kibana 1 是 PHP 写的,Kibana 2 变成了 Ruby,Kibana 3 则是纯 HTML 和 Javascript。PPT 全文链接

会上还学到了两个有用的知识点。其一是用 cpanm 来安装 CPAN 包。相比于 cpan 命令,cpanm 最小化,追求零配置,简单易用。cpanm 还可以直接接一个 git 代码库的 URL 进行安装。其二是用 metacpan 来搜索 CPAN 包/模块,比起 search.cpan.org 来 metacpan 是一个更年轻的项目、提供更友好的搜索界面。

最后是两点注记。cpanm 在 Fedora 上可以用 yum 安装:yum install perl-App-cpanminus。要在非系统目录下安装 CPAN 包,需要安装 local::lib (yum -y install perl-local-lib),然后在 ~/.bash_profile 或对应文件中加上一行

eval $(perl -I$HOME/perl5/lib/perl5 -Mlocal::lib)